HobbyKing
POWERBOX ADAPTER WIRE MPX MALE - JR/FUTABA .5MM WIRE 10CM
,
PowerBox Adapter wire MPX Male - JR/Futaba .5mm wire 10cm5 Reviews
HobbyKing
POWERBOX ADAPTER WIRE DEANS MALE - JR/FUTABA .5MM WIRE 10CM
,
PowerBox Adapter wire Deans Male - JR/Futaba .5mm wire 10cm5 Reviews
HobbyKing
POWERBOX GEMINI JR W/ SENSOR SWITCH
Operating voltage | 4,0 Volt bis 9,0 Volt |
Power supply | Two 5-cell NiCd or NiMH batteries |
Current drain | approx. 30 mA |
Voltage drop | approx. 0.30 V |
Max. receiver current | 2 x 4 A (stabilised) |
Servo supply voltage | 5,9 Volt |
Gyro supply voltage | 5.3 Volt |
Max. continuous current | 10 A |
Temperature range | -10 to +75C |
Temperature range | 72 x 28 x 14 ( L x W x H ) |
Weight | 32 g including all leads |
SensorSwitch | 12 g |
Features:, The truly redundant power supply for greater safety!, Specification:,
The PowerBox Gemini is a modern power supply system containing ...5 Reviews
HobbyKing
X3 UBEC 6V-23V INPUT - 5V 3A OUTPUT
Output | 5v 3A |
Dimensions | 38x21x7 |
Input Lead Length | 68mm |
Output lead length | 145mm |
Plug | JR Style |
Specs:, Input:, 6v~23v (2s~5s Lipoly, 2s~6s LiFe, 5s~15s Nimh), Weight Inc Leads:9g,
X3 UBEC can handle up to 5s Lipoly or 6s ...3 Reviews
HobbyKing
TURNIGY DLUX 10A (10~60V) HV SBEC
Adjustable Low Voltage Alarm | 10~60V |
Input | bare leads / Output |
Dimensions | 15.7 x 31 x 54mm |
Weight | 45g |
Features:, • Stable, reliable power supply for your servos/receiver, Specs:, Input Voltage:, 3~14S Lipoly (10~60V), Output Voltage:, 5.2V/6.0V/6.8V/7.4V/8.4V selectable, Output Current:, 10A @ 6V continuous (15A @ 6V peak), Switch Type:, Fail Safe (fail safe on) pin-flag contactless type, Power Connector:,
The Turnigy dlux 10A HV switching BEC provides up to ...5 Reviews
HobbyKing
TURNIGY DLUX 10A LINEAR VOLTAGE REGULATOR (5.2~7.4V OUTPUT)
Input Voltage | 2S Lipoly (6~8.4V) |
Adjustable Low Voltage Alarm | 6.6~7.4V |
Input | JST plug / Output |
Dimensions | 55 x 31.5 x 14mm |
Weight | 35g |
Features:, • Stable, reliable power supply for your servos/receiver, Specs:, Output Voltage:, 5.2V/6.0V/6.8V/7.4V/8.4V selectable, Output Current:, 10A @ 6V continuous (15A @ 6V peak), Switch Type:, Fail Safe (fail safe on) pin-flag contactless type, Power Connector:,
The Turnigy dlux 10A linear voltage regulator provides up to ...5 Reviews
HobbyKing
HOBBYKING 7A 5.5V HIGH VOLTAGE INPUT UBEC (23~45V)
Input Lead | bare wire leads |
Output Lead | JR receiver plug |
Dimensions | 46x28x9mm |
Weight | 16g |
Features:, • High-voltage input (6~12S lipoly), Specs:, Input Voltage:, 23~45V (6~12S lipoly), UBEC Output:, 5.5V / 7A continuous,
This high quality UBEC will output a steady 5.5V and ...5 Reviews
HobbyKing
ROTORSTAR SUPER MINI S-BEC 6S 10A
• Wide input voltage range | 6~25.2VDC |
Output Current | 10A max |
Output Voltage | 6V +/-0.1V |
Working Temp | -20~65°C |
Storage Temp | -10~70°C |
Output Plug Type | JR style |
Dimensions | 23x23x15mm |
Weight | 30g |
Features:, • Compact size and lightweight, Specs:, Input Voltage:, 6~25.2V (2S~6S lipoly),
The RotorStar 6S 10A Super Mini S-BEC supplies a constant ...HobbyKing
TURNIGY MULTIFUNCTION LCD PROGRAM BOX FOR BRUSHLESS ESC
Weight | 65g |
Display | 16*2 characters LCD |
Programmable items (Car ESC) | Running mode |
Programmable items (Aircraft & Helicopter ESC) | Brake setting |
This program card is suitable for the following ESCs:, Turnigy Trackstar(EZRUN) Series Car ESC, Features:, • Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD screen, Specs:, Size:, 90mm(L)x51mm(W)x17mm(H), Input Voltage:, 4.5~12.6V (If ESC does not have a built in BEC you must use an additional battery pack), Interface:, Mini USB interface, ESC interface (Futaba/JR type plug, power supply interface (Futaba/JR type plug), Note:, Some ESC's have less programmable features and some have more, please read the user manual of your ESC for programs available.,
Turnigy Multifunction LCD Program Box for Brushless ESC This Multifunction ...HobbyKing
POWERBOX COMPETITION SRS W/ SENSOR SWITCH
• SRS | Serial Receiver System that uses receivers with serial interface |
SRS stands for Serial Receiver System: in contrast to conventional battery backer systems, servo information is transferred using a digital serial signal generated by the receiver. This reduces the number of connections required between the receiver and the PowerBox to a single cable. It is also easy to connect a second receiver to the system, which then assumes control of the model if the first receiver should fail to pick up a signal. In the case of Spektrum and Jeti, only the satellite receivers are connected to the Competition SRS., However, servo-matching also allows functions to be linked, avoiding the need for two channels at the transmitter. As an example: the left and right landing flaps can be operated using just one transmitter channel, as the direction of rotation and the servo end-points are adjusted at the Competition., Operating voltage:, Power source:, Current drain:, Max. receiver and servo current:, Servo signal resolution:, Signal frame rate:, Screen:, Bus systems:, Servo sockets:, Temperature range:, Dimensions:, Weight:, SensorSwitch:, EMV approval:, CE approval:,
The PowerBox Competition SRS is the first device in an ...HobbyKing
TURNIGY DUAL POWER UNIT FOR LARGE SCALE MODELS
Weight | 89g |
5 Reviews
HobbyKing
TURNIGY 5V/6V 5A HELI-UBEC FOR LIPOLY (6~16V)
Features | • Compact in size |
Output voltage | 5V/6V (selectable) |
Burst output current | 7.5A |
Input | 6V~16V |
Size | 39x27x15.5mm |
Weight | 25g |
Specs:, Continuous output current:5A,
The Turnigy Heli-UBEC is a great option for models requiring ...1 Reviews